Full tear-out cost breakdown

Asphalt Driveway Replacement Cost Calculator

Estimate asphalt driveway replacement cost with editable removal, base repair, paving, and fixed-cost assumptions before comparing contractor quotes.

Direct answer

How much does it cost to replace an asphalt driveway?

Asphalt driveway replacement cost depends on the measured area plus the work below the surface: removal and disposal of old asphalt, damaged-base repair, new paving, access, and any fixed local charges. Enter local rates to build a planning estimate, then ask contractors to price the same written scope. It is not a live price quote or a substitute for a site inspection.

Project inputs

Include removal, damaged-base repair, and new paving in one transparent planning total.

Driveway length (ft)

Driveway width (ft)

Compacted asphalt depth (in)

Removal and disposal ($/sq ft)

New asphalt paving ($/sq ft)

Area needing base or spot repair (%)

Repair rate ($/sq ft repaired)

Permits or fixed costs ($)

The prefilled rates are examples, not current local prices. Replace them with rates from written contractor quotes whenever possible.

Planning result

Driveway replacement estimate

Estimated total

$4,710

Planning range $4,239–$5,417

Project area600 sq ft

Preparation / removal$1,050

Base or spot repair$360

Asphalt paving$3,300

Estimated asphalt11.6 tons

Average cost$8 / sq ft

A sound base is essential. If widespread movement, drainage failure, or deep settlement exists, a site inspection can change the scope substantially.

Full scope

Plan removal, disposal, localized base repair, new asphalt, and fixed charges in one worksheet.

Use local rates

Replace the example rates with figures from written local quotes.

Quote-ready

Use the same area and scope with each contractor to make totals easier to compare.

What full driveway replacement includes

Replacement is more than putting a new layer on top. A complete scope states what is removed, what is repaired underneath, and what new surface will be installed.

Removal and disposal

Old asphalt must be broken up, loaded, and hauled away; make sure the quote says whether this is included.

Base repair

Soft spots, settlement, and failed edges may need repair before fresh asphalt can hold up.

New paving

Confirm the specified compacted thickness, paving area, edge treatment, and cleanup.

When replacement can make more sense than resurfacing

An overlay can be useful when the existing surface and base are sound. Replacement is often the clearer scope when damage comes from beneath the old surface.

Widespread cracking

Many connected cracks can be a sign that the old pavement needs more than a cosmetic top layer.

Movement or low spots

Settlement and standing-water areas should be inspected before any new asphalt covers them.

Repeated patching

If repairs keep returning, compare a complete replacement scope with another short-term patch cycle.

Example projects

Swipe the table left or right to see every column.

Project	Scope	What to check
Compact driveway	600 sq ft; removal, repair, and paving rates entered above	Use current local removal, base-repair, and paving rates to build a budget.
Two-car driveway	800 sq ft; 20% spot-base repair assumption	Add disposal, access, and repair allowances after a site visit.
Long driveway	1,500 sq ft; full replacement planning scope	Confirm hauling, grading, drainage, and fixed fees in the written scope.

Quote checklist

What to confirm before requesting quotes

Ask whether the old asphalt will be removed and where it will be disposed of.
Confirm the compacted thickness of the new asphalt, not just the loose depth delivered.
Ask which base repairs, grading, drainage fixes, edges, and cleanup are included.
Use the same measured square footage and written scope when comparing two or three bids.

When you request quotes

Share the same dimensions, thickness, and scope with two or three local suppliers or paving contractors so their quotes are easier to compare.