Asphalt Millings Calculator
Asphalt millings calculator for estimating tons, cubic yards, coverage, and material cost for milled asphalt, crushed asphalt, or RAP using local prices.
Direct answer
How much asphalt millings do I need?
Measure length, width, compacted depth, and the supplier's bulk density to estimate asphalt millings in tons and cubic yards. The same method can be used for reclaimed asphalt pavement (RAP) or crushed asphalt when the supplier provides a suitable density. Because recycled material varies, confirm the scale-ticket weight, truck capacity, and recommended installed depth before ordering. This estimate covers material quantity, not base design, drainage, or final pavement performance.
Estimate tons, cubic yards, coverage, and material cost for asphalt millings or reclaimed asphalt pavement (RAP).
Millings density changes with gradation, moisture, and compaction. Ask the supplier for a scale-ticket or bulk-density value before placing a final order.
Quantity result
Asphalt millings needed
Estimated order quantity
26.4 tons
About 16.3 cubic yards including allowance
Tons and cubic yards
Estimate both common ordering units from the same planned area and compacted depth.
Local density input
Use a supplier-provided density when available because millings can weigh differently after compaction.
Material-only estimate
Enter your local per-ton price to plan material cost without treating it as a delivered installed quote.
How to order asphalt millings
Asphalt millings, crushed asphalt, and RAP are recycled materials, so order quantity should be checked with the actual supplier rather than a one-size-fits-all conversion.
Measure finished area
Use the length and width of the area you want covered, including pull-offs or turning areas when they will receive millings.
Choose compacted depth
Enter the planned final depth, then allow for compaction and waste so the delivered material is not short.
Confirm ticket weight
Ask whether the supplier sells by ton or yard and request the material density or a recent scale-ticket weight.
What changes a millings estimate
Millings are not identical to new hot-mix asphalt. Their density, compaction behavior, and suitability depend on the material source and the project conditions.
Material condition
Fine, wet, or mixed reclaimed asphalt can pack differently than cleaner, well-graded millings.
Base and drainage
A firm base and controlled water are still important for a driveway, lane, or parking area built with recycled asphalt.
Delivery and placement
Truck capacity, stockpile location, spreading equipment, and rolling can affect the quantity and installed outcome.
Swipe the table left or right to see every column.
| Project | Scope | What to check |
|---|---|---|
| Short driveway repair | 400-800 sq ft | Confirm whether the supplier can deliver a partial load. |
| Long driveway | 1,000-2,500 sq ft | Check the planned compacted depth and rolling method. |
| Parking or access area | 2,500+ sq ft | Review drainage, base support, and truck access before ordering. |
What to confirm before requesting quotes
- Confirm whether the supplier prices asphalt millings by ton, cubic yard, truckload, or delivered load.
- Ask for a material density or scale-ticket weight instead of relying only on a generic conversion.
- Compare delivered quantity, spreading, grading, and compaction as separate line items.
- Confirm the planned finished depth, base condition, drainage work, and access for delivery trucks.
When you request quotes
Share the same dimensions, thickness, and scope with two or three local suppliers or paving contractors so their quotes are easier to compare.
Related asphalt tools
Choose the tool that matches the next part of your project.